banner
Aircondition.Com is the fault of our sponsors!
[ Follow Ups ] [ Post Followup ] [ Bulletin Board ] [ Home ] [ FAQ ] [ Technical Pages ]

We Recommend...   Cool Profits - MVAC Industry News   AC Source - Tools, Equipment & Parts
 

Subject:    Re: STARTING THE COMPRESSOR AFTER PULLING VACCUUM
Date:    May 16, 2005 at 21:06:11
Posted by:    Lynn via: or 164.89.253.4
In Reply to:    The message posted by Chick on April 22, 2005 at 09:28:02:

Just quick question I am going to work on this vehicle again and have purchased a 30lb. cylinder. If I want to put liquid through the High side, Do I turn the 30lb. cylinder upside down to get liquid out like you would a 12 oz. can? I might add that it is a Dupont cylinder with leak detector in it. Also, I am going to go ahead and change Accumulator and O-tube. How much oil should I add back due to changing accumulator and what is the easiest way to add. Thanks, Lynn

Follow Ups:


Name:
E-Mail:

Subject: Archived -



  Most Popular A/C Knowledge Base Questions

  1. What is Black Death?
  2. Troubleshooting with Gauges FAQ
  3. Location and Replacement of Cabin Air Filters
  4. How Refrigerant Flows Through the System
  5. A/C Flush FAQ
  6. Air Powered A/C Vacuum Pumps
  7. What Does it Mean to Flush the A/C System?
  8. Condensate Drain on Jeep Grand Cherokee
  9. The First Step to Successful Refrigerant Leak Detection
  10. Which Electronic Refrigerant Leak Detector to Buy?




[ Follow Ups ] [ Post Followup ] [ Bulletin Board ] [ FAQ ]