banner
Aircondition.Com is the fault of our sponsors!
[ Follow Ups ] [ Post Followup ] [ Bulletin Board ] [ Home ] [ Topics ] [ Technical Pages ]

We Recommend...   Cool Profits - MVAC Industry News   AC Source - Tools, Equipment & Parts
 

Subject:    Re: Dealer Jerking Me Around on Diagnosis?
Date:    May 31, 2005 at 19:18:22
Posted by:    DNT on via: or 66.239.171.232
In Reply to:    The message posted by Doug Ledbetter on May 31, 2005 at 18:24:54:

Very unusual for a NEW compressor to be bad plus those pressure sound pretty good and should produce some refrigerant effect. I think chick hit the problem on the head when he mentioned the blend door. Pinch off both heater hose lines to the heater core out in the engine bay so no hot coolant circulates thru the heater core and see what you get on your AC vents after it runs for a few minutes, if you see a big drop you will need to take a closer look at that area, could it possibly have been your problem all along?

Follow Ups:




Subject: Archived -



  Most Popular A/C Knowledge Base Questions

  1. What is Black Death?
  2. Troubleshooting with Gauges FAQ
  3. Location and Replacement of Cabin Air Filters
  4. How Refrigerant Flows Through the System
  5. A/C Flush FAQ
  6. Air Powered A/C Vacuum Pumps
  7. What Does it Mean to Flush the A/C System?
  8. Condensate Drain on Jeep Grand Cherokee
  9. The First Step to Successful Refrigerant Leak Detection
  10. Which Electronic Refrigerant Leak Detector to Buy?




[ Home Page ] [ Archives ] [ Search ] [ Knowledge Base ]