| Aircondition.Com Recommends... AC Source - Tools & Equipment and IM Cool.Com - Industry News |
In Reply to: Re: this means... posted by Stacey on June 13, 2001 at 21:13:38:
Hook up you gauges again. Pull the vacuum down as low as you can again. Close the wheels and the HIGH SIDE valve. Hook up you tank (or cans) to the center hose. Purge the air out of the line (yellow) open the blue (low side) wheel and it will start to suck in the refrigerant. Ater it sucks in as much as it can, start the car, turn the air on and continue chargeing until the pressures are met...I don't get this far down on the board to much, so if you need the pressure, e-mail me with make and year, refrigerant being used and I'll sedn you the pressures....Good luck..MAKE SURE THE HUGH SIDE WHEEL IS CLOSED WHEN CHARGING..Otherwise the pressure can come back and blow the can up...