Posted by t.b. on May 10, 19100 at 15:04:06: via: wcs2.norfolk.nipr.mil or 198.26.132.102
In Reply to: Re: old frigiking under dash system posted by fred swamson on May 09, 19100 at 19:02:15:
Ok, that makes it more of a challenge. First mount the unit under the dash and route the wiring harness. Give it power and get the inside fan running and run the compressor wire out to the engine. Next mount a compressor on the engine, use whatever brackets are correct for that engine. Install a condenser in front of the radiator, easiest is use one fron a similar truck. Next find hoses or have hoses made to go from compressor to receiver drier, to condenser, to evaporator and back to compressor. Add oil, evacuate, and charge.